• Highly Conformable
• Linerless Rubber Tape
• Designed for use in splicing and terminating wires and cables with low and high voltage to 69kV.
• Rated 90°C (194°F) Continuous operating temperature
• Good for moisture sealing

• Highly Conformable
• Linerless Rubber Tape
• Designed for use in splicing and terminating wires and cables with low and high voltage to 69kV.
• Rated 90°C (194°F) Continuous operating temperature
• Good for moisture sealing

• Highly Conformable
• Linerless Rubber Tape
• Designed for use in splicing and terminating wires and cables with low and high voltage to 69kV.
• Rated 90°C (194°F) Continuous operating temperature
• Good for moisture sealing

• Highly Conformable
• Linerless Rubber Tape
• Designed for use in splicing and terminating wires and cables with low and high voltage to 69kV.
• Rated 90°C (194°F) Continuous operating temperature
• Good for moisture sealing

• Heavy duty 8.5 mil thickness
• 3/4" x 66 ft.
• Flame retardant, cold and weather resistant
• Extra thickness provides added electrical properties
• Operating Temperature: -18°C (0°F) to 105°C (220°F)

• Heavy duty 8.5 mil thickness
• 2" x 108 ft.
• Flame retardant, cold and weather resistant
• Extra thickness provides added electrical properties
• Operating Temperature: -18°C (0°F) to 105°C (220°F)

• 7 mil thickness
• 3/4" x 66 ft
• Flame retardant, cold and weather resistant
• Insulation for wire cable splices up to 600v.
• Operating Temperature: -18°C (0°F) to 105°C (220°F)

• 7 mil thickness, 3/4" x 66 ft.
• Available in Blue, Brown, Green, Gray, Orange, Purple, Red, White, Yellow
• Use it in phase identification, motor leads, piping systems, insulating splices and terminations.
• Flame retardant, cold and weather resistant
• Insulation for wire cable splices up to 600v.
• Operating Temperature: -18°C (0°F) to 105°C (220°F)

• Easy to install
• Provides watertight, fume tight, O-Ring seal
• Heat shrinkable nose
• Watertight cable entry into enclosure of up to 3/16" wall thickness.
• Operating Temperature: -55°C to 90°C

Aqua-Shield

•   Hard Line Cable Cutter , 1.125 inch (28.5 mm) cable size

Hydraulic Power Required: 3000 Psi, 4-6 GPM

Auxiliary Cylinder Power (To retract Anvil): 2750 Psi

Lithium Ion Battery Powered, with Charger included